DMC.micro PRO / DMC.micro Classic
Firmware Change Log


 v2.02a added config option for bypass send ON CHANGE or ALWAYS
 fix issue with echoSysex() function, was sending byte2 twice in certain situations
 
 v2.02  added sysex output for C4 + other Source Audio devices to enable MIDI over 1/8" TRRS
 Added Source Audio One Series TRRS device
 Fixed issue with USB receive not sending out MIDI CC correctly
 
 v2.01d added PRESETx4 and GLOBALx4 to clock menu
 
 v2.01c added OLED brightness command
 
 v2.01b reduced USB power draw to allow use with iOS devices
 Added CH.A BASE configuration, allows user to set output MIDI channel range
 Show MIDI channel for each device on the Device Pages
 Preset mode bypass state is now only sent if the device needs to change
 
 v2.01a Fixed issue with UTIL NAMES not loading if entire preset was sent for 100-105.
 Fixed issue with preset dump + recall loading invalid presets 100-105
 Added sysex comand 0x79:  return current program
 
 v2.01 Fixed issue with DC not sending BYPASS commands

 v2.00k Added Split Expression
 Fixed issue with expression pedal not sending to device D
 Increased speed of expression input, faster updates
 Added RLY output to MultiJack, use CHANNEL to assign to one of the buttons

 v2.00j1 Added preset name display to LED4 version
 Load in current preset if we dump or save that preset
 Added 0x7A "dump with recall" for a single preset

 v2.00j Factory reset now sets UTIL mode names

 v2.00i

 v2.0h Fixed issue with sending sysex from setup mode if USB host is active
 Increased sysex message banking time, prevents screen blinking
 Added dump all command to sysex (0x7B + number)
 Fixed issue with factory reset not clearing preset 99
 Added 0x58 and 0x5B commands for renaming presets
 
 v2.00g First Production Release
 fixed issue with sysex send failing when no serial number is assigned
 Added Eventide Stomp device

 v2.07 fixed issue with name display on longer devices
 Fixed issue with tap out NO / NC
 Fixed issue with expression display texts
 Changed display compare method to memcmp / memcpy instead of for() loop.
 Added super-cool secret config menu items!
 Fixed issue with sysex dump if the serial number is wrong
 

 v2.06 reworked sysex handling to support external librarians
 Added custom1 and custom2 as device types!
 Factory reset now populates preset names (00.NEW, etc)
 
 v2.05
 Added GT-1K Core device
 
 v2b04
 fixed LED4 not saving brightness
 
  v2b03
    Disable unused setup items!  WOOT
  Added long-hold to right footswitch (return to preset mode)
  Added on-device preset name edit (long-hold left button from preset mode)
  Changed most large eeprom transfers to block writes
  Changed sysex display, so that it doesn't flash back and forth

  v2b02
  fixed issues with sysex config load and store
  now if you enter setup at boot, USB host is temp disabled
  Added CC to set clock remotely (103 / 104)
  Added "SEND" "LOAD" messages during sysex dumps
  Fixed issue with AutoConfig sending

  

  v2b01
  Fixed loading names / util over SYSEX (worked but corrupted until reboot, now fixed)
  Add re-inits for serial1 (multijack) in setup
  FIXED ISSUE WITH C4 BYPASS
  Increased expression input speed (10ms instead of 20ms)

  v2b00
  Too much to list
  Clock mode
  Util 2 mode
  OLED support
  Yonks

  
   v1.05a
   Added more devices - Eventide Rose, GFI synesthesia, Walrus D1, Outward V2, Boss 200-series
   Added user-definable UTIL mode for 2 button foot switch
   Added more MIDI options for MultiJack
   Changed output relay to N-O, N-C options
   
   v1.04d
   Added "re-send current program" to device modes

   v1.04c
   Added tap length setup item
   increased debounce thresholds
   added tap tempo command for particle V2

v1.04b
Updated controls for C4 bypass / preset select
Added more options for MIDI thru
fixed issues with MIDI thru
Added timeout between USB sends

v1.04a
fixed USB host handling of incoming system messages (clock, start, etc)
added more device support

   v1.04
   Added support for Source Audio C4
   

  v1.03b
  use returnDelay to set wait time for return message
  added CC RETURN type to util mode
  added MIDI CC input for expression (CC100) and tap tempo (CC93)


   v1.02d
   fixed issue with MIDI note sending

   testing!

   Added electronic serial number reading / storing / editing

   v1.01f
   fix issue with utility mode not sending the right values for toggle and one shot