MIDI Cable PRO
Made in the USA by Best-Tronics Pro Audio, these cables feature our exclusive metal right-angle plugs with rotating connector sleeves.
Designed to fit your MIDI gear, these are the highest quality cables available.
Overview
Made in the USA by Best-Tronics Pro Audio, these cables feature our exclusive metal right-angle plugs with rotating connector sleeves.
The cables ship from Disaster Area with both ends set in the “12 o’clock” orientation but are easy to re-configure for your application. Simply loosen the screw on the head shell and carefully rotate the connector sleeve and pins to your desired orientation, then tighten the screw.
The PRO MIDI cables are perfect for flat boards such as Creation, Trailer Trash, or LA Sound Design, and also work great on boards with cable access slots such as Pedaltrains.
Need to fit the plugs through the larger slots on Temple Audio boards? Carefully disassemble the head shell and pass the pin sleeve through the hole, then reassemble on the other side.
Features
All five pins wired through
Slim plug design, fits into recessed MIDI ports
Four 24 AWG (42×40) Soft Bare Copper Conductors
95% Tinned Copper Braided Shield
0.245″ Outer Diameter PVC Jacket
DN-5501 Right Angle Plugs rotate to 8 different positions
Hand Soldered in USA
Limited Lifetime Warranty
Which Cable Should I Buy?
8 inch: Perfect for going between two Strymon pedals placed next to each other on your pedalboard.
1 foot: We recommend 1ft. for connecting between our DMC or DPC controllers and your MIDI pedals on the same row.
1.5 foot: Connecting controllers or pedals on different rows of shallow boards such as the Pedaltrain PT-1 or PT-2.
2 foot: Connecting controllers or pedals on different rows of deeper boards such as the Pedaltrain Novo / PT-3 / PT-Pro.
3 foot: Connecting to off-board devices, connecting controllers at opposite corners of large boards.
Tip: Use a piece of string or an old guitar cable to measure the cable length you’ll need before ordering. Our cables are measured from plug to plug, when in doubt purchase one size longer than you think you need. We are happy to swap out your cables if you order the wrong length, but you’ll have to pay the difference plus shipping both ways.
Need a longer cable or custom configuration? Contact our cable partner Best-Tronics Pro Audio at btpa.com
Documentation
MIDI Cable Instructions
